nodetool getconcurrentcompactors — 동시 컴팩터 수 조회

nodetool getconcurrentcompactors — 동시 컴팩터 수 조회

getconcurrentcompactors 명령은 시스템에 설정된 동시 컴팩터(compactor) 개수를 조회하는 nodetool 명령이에요. 컴팩션을 동시에 몇 개의 스레드로 수행하는지 확인할 때 씁니다.

출처: nodetool getconcurrentcompactors

본문

이 명령은 노드에서 동시에 실행될 수 있는 컴팩터 스레드의 개수를 출력해요. 컴팩션 로드가 높으면 이 값을 확인한 뒤 setconcurrentcompactors로 조정할 수 있어요.

원문의 사용법은 다음과 같습니다.

NAME
        nodetool getconcurrentcompactors - Get the number of concurrent
        compactors in the system.
SYNOPSIS
        nodetool [(-h <host> | --host <host>)] [(-p <port> | --port <port>)]
                [(-pp | --print-port)] [(-pw <password> | --password <password>)]
                [(-pwf <passwordFilePath> | --password-file <passwordFilePath>)]
                [(-u <username> | --username <username>)] getconcurrentcompactors
OPTIONS
        -h <host>, --host <host>
            Node hostname or ip address
        -p <port>, --port <port>
            Remote jmx agent port number
        -pp, --print-port
            Operate in 4.0 mode with hosts disambiguated by port number
        -pw <password>, --password <password>
            Remote jmx agent password
        -pwf <passwordFilePath>, --password-file <passwordFilePath>
            Path to the JMX password file
        -u <username>, --username <username>
            Remote jmx agent username

이 명령은 인자를 받지 않는 단순 조회 명령이라, 표준 연결 옵션만 사용해요.

  • -h <host>, --host <host> — 대상 노드의 호스트명 또는 IP 주소를 지정해요.
  • -p <port>, --port <port> — 원격 JMX 에이전트 포트 번호를 지정해요.
  • -pp, --print-port — 호스트를 포트 번호로 구분하는 4.0 모드로 동작해요.
  • -pw <password>, --password <password> — 원격 JMX 에이전트 비밀번호를 지정해요.
  • -pwf <passwordFilePath>, --password-file <passwordFilePath> — JMX 비밀번호 파일의 경로를 지정해요.
  • -u <username>, --username <username> — 원격 JMX 에이전트 사용자 이름을 지정해요.

더 알아보기