nodetool getsnapshotthrottle — 스냅샷 제한 처리량 조회

nodetool getsnapshotthrottle — 스냅샷 제한 처리량 조회

getsnapshotthrottle 명령은 snapshot/clearsnapshot 작업의 초당 스냅샷 링크 수(snapshot_links_per_second) 제한을 조회하는 nodetool 명령이에요.

출처: nodetool getsnapshotthrottle

본문

이 명령은 스냅샷 생성/삭제 시 초당 생성할 수 있는 하드 링크 수(snapshot_links_per_second) 제한을 출력해요. 값을 조정하려면 setsnapshotthrottle 명령을 사용하면 됩니다.

원문의 사용법은 다음과 같습니다.

NAME
        nodetool getsnapshotthrottle - Print the snapshot_links_per_second
        throttle for snapshot/clearsnapshot
SYNOPSIS
        nodetool [(-h <host> | --host <host>)] [(-p <port> | --port <port>)]
                [(-pp | --print-port)] [(-pw <password> | --password <password>)]
                [(-pwf <passwordFilePath> | --password-file <passwordFilePath>)]
                [(-u <username> | --username <username>)] getsnapshotthrottle
OPTIONS
        -h <host>, --host <host>
            Node hostname or ip address
        -p <port>, --port <port>
            Remote jmx agent port number
        -pp, --print-port
            Operate in 4.0 mode with hosts disambiguated by port number
        -pw <password>, --password <password>
            Remote jmx agent password
        -pwf <passwordFilePath>, --password-file <passwordFilePath>
            Path to the JMX password file
        -u <username>, --username <username>
            Remote jmx agent username

이 명령은 인자를 받지 않는 단순 조회 명령이라, 표준 연결 옵션만 사용해요.

  • -h <host>, --host <host> — 대상 노드의 호스트명 또는 IP 주소를 지정해요.
  • -p <port>, --port <port> — 원격 JMX 에이전트 포트 번호를 지정해요.
  • -pp, --print-port — 호스트를 포트 번호로 구분하는 4.0 모드로 동작해요.
  • -pw <password>, --password <password> — 원격 JMX 에이전트 비밀번호를 지정해요.
  • -pwf <passwordFilePath>, --password-file <passwordFilePath> — JMX 비밀번호 파일의 경로를 지정해요.
  • -u <username>, --username <username> — 원격 JMX 에이전트 사용자 이름을 지정해요.

더 알아보기