nodetool gettimeout — 유형별 타임아웃 조회

nodetool gettimeout — 유형별 타임아웃 조회

gettimeout 명령은 주어진 유형의 타임아웃 값을 밀리초 단위로 조회하는 nodetool 명령이에요. 읽기/쓰기/범위/카운터 등 다양한 타입의 타임아웃을 확인할 때 씁니다.

출처: nodetool gettimeout

본문

이 명령은 지정한 유형의 타임아웃 값을 ms 단위로 출력해요. 유형에는 read, range, write, counterwrite, cascontention, truncate, internodeconnect, internodeuser, internodestreaminguser, misc(일반적인 rpc_timeout_in_ms)가 있습니다.

원문의 사용법은 다음과 같습니다.

NAME
        nodetool gettimeout - Print the timeout of the given type in ms
SYNOPSIS
        nodetool [(-h <host> | --host <host>)] [(-p <port> | --port <port>)]
                [(-pp | --print-port)] [(-pw <password> | --password <password>)]
                [(-pwf <passwordFilePath> | --password-file <passwordFilePath>)]
                [(-u <username> | --username <username>)] gettimeout [--] <timeout_type>
OPTIONS
        -h <host>, --host <host>
            Node hostname or ip address
        -p <port>, --port <port>
            Remote jmx agent port number
        -pp, --print-port
            Operate in 4.0 mode with hosts disambiguated by port number
        -pw <password>, --password <password>
            Remote jmx agent password
        -pwf <passwordFilePath>, --password-file <passwordFilePath>
            Path to the JMX password file
        -u <username>, --username <username>
            Remote jmx agent username
        --
            This option can be used to separate command-line options from the
            list of argument, (useful when arguments might be mistaken for
            command-line options
        <timeout_type>
            The timeout type, one of (read, range, write, counterwrite,
            cascontention, truncate, internodeconnect, internodeuser,
            internodestreaminguser, misc (general rpc_timeout_in_ms))

옵션과 인자를 하나씩 살펴볼게요.

  • -h <host>, --host <host> — 대상 노드의 호스트명 또는 IP 주소를 지정해요.
  • -p <port>, --port <port> — 원격 JMX 에이전트 포트 번호를 지정해요.
  • -pp, --print-port — 호스트를 포트 번호로 구분하는 4.0 모드로 동작해요.
  • -pw <password>, --password <password> — 원격 JMX 에이전트 비밀번호를 지정해요.
  • -pwf <passwordFilePath>, --password-file <passwordFilePath> — JMX 비밀번호 파일의 경로를 지정해요.
  • -u <username>, --username <username> — 원격 JMX 에이전트 사용자 이름을 지정해요.
  • -- — 명령줄 옵션과 인자 목록을 구분할 때 써요.
  • <timeout_type> — 조회할 타임아웃 유형을 지정해요. read, range, write, counterwrite, cascontention, truncate, internodeconnect, internodeuser, internodestreaminguser, misc(일반 rpc_timeout_in_ms) 중 하나예요.

더 알아보기