nodetool settimeout — 세부 작업 타임아웃 설정
nodetool settimeout — 세부 작업 타임아웃 설정
이 명령은 특정 타입의 작업(mutate, read, range, counter 등)에 적용되는 타임아웃을 밀리초(ms) 단위로 설정해요. 0을 주면 해당 타임아웃을 비활성화(무제한)합니다. 클러스터 워크로드에 맞춰 개별 작업 타임아웃을 세밀하게 튜닝할 때 사용합니다.
본문
실제 사용 구문은 아래와 같아요. 옵션 설명은 명령의 도움말(usage)을 그대로 옮긴 것이니, 실행 환경에 맞춰 필요한 옵션만 골라 사용하면 됩니다.
NAME
nodetool settimeout - Set the specified timeout in ms, or 0 to disable
timeout
SYNOPSIS
nodetool [(-h <host> | --host <host>)] [(-p <port> | --port <port>)]
[(-pp | --print-port)] [(-pw <password> | --password <password>)]
[(-pwf <passwordFilePath> | --password-file <passwordFilePath>)]
[(-u <username> | --username <username>)] settimeout [--] <timeout_type>
<timeout_in_ms>
OPTIONS
-h <host>, --host <host>
Node hostname or ip address
-p <port>, --port <port>
Remote jmx agent port number
-pp, --print-port
Operate in 4.0 mode with hosts disambiguated by port number
-pw <password>, --password <password>
Remote jmx agent password
-pwf <passwordFilePath>, --password-file <passwordFilePath>
Path to the JMX password file
-u <username>, --username <username>
Remote jmx agent username
--
This option can be used to separate command-line options from the
list of argument, (useful when arguments might be mistaken for
command-line options
<timeout_type> <timeout_in_ms>
Timeout type followed by value in ms (0 disables socket streaming
timeout). Type should be one of (read, range, write, counterwrite,
cascontention, truncate, internodeconnect, internodeuser,
internodestreaminguser, misc (general rpc_timeout_in_ms))